Fasteners for Construction & Contracting in Dubai
Construction sites in the UAE run on tight programmes, so the fasteners have to be the right specification and on site when the crew needs them. Mufaddal Fasteners supplies contractors with anchor bolts, structural bolts, threaded rods, nuts and washers from our base in Dubai.
Tell us the standard, grade, size and finish your drawings call for, and we will quote against that exact specification instead of a look-alike.
Anchoring into concrete
Most structural and services fixings end up in concrete, and the anchor you choose depends on the load, the concrete and the edge distance. Foundation (J- and L-) bolts are cast into the pour for base plates and columns. Wedge anchors, sleeve (shield) anchors and drop-in anchors are installed into hardened concrete, while chemical studs are used when you need high pull-out resistance or work close to an edge.
Always follow the anchor manufacturer's data for embedment depth, spacing and hole cleaning. A correctly sized anchor installed in a dusty hole will not reach its rated load.
Structural bolting and strength grades
Steel connections normally use hex bolts with matching nuts and washers. Property classes 8.8 and 10.9 (ISO 898-1) are the common high-strength choices, and the nut must be rated for the bolt: for example a class 8 nut with an 8.8 bolt and a class 10 nut with a 10.9 bolt.
Do not substitute a lower-grade nut or washer to save time — the weakest component sets the strength of the joint.
- Hex bolts and heavy hex nuts for steel connections
- Foundation anchor bolts and threaded rods for base plates
- Flat and spring washers for load spreading and vibration
Protection against humidity and salt air
Dubai combines high humidity with salt-laden air near the coast, and fasteners left outdoors will corrode quickly if the coating is wrong. Hot-dip galvanised (HDG) is the usual choice for exposed steelwork, zinc plating (including yellow zinc, YZP) suits dry interior locations, and stainless steel A2/A4 (304/316) is used where appearance or long service life matters.
If you are unsure which finish suits a location, ask us before ordering — the cheapest finish is often the most expensive one to replace.
Fasteners for This Industry
Every product page lists the available sizes, grades and materials. Open a category to see the full range.
Anchoring Items
Foundation bolts, wedge anchors, shields, drop-in anchors and concrete anchors.
View all Anchoring ItemsFrequently Asked Questions
Which anchor should I use in concrete?
Do you supply hot-dip galvanised fasteners for outdoor steelwork?
Can you quote from a bill of quantities?
Need a Quote?
Send us your specification — size, grade, material, finish and quantity — and our team will reply with a quotation.